ROTOR
TO APPLY LABELS ON 2 ADJACENT SIDES
Rotating movement applicator.
The Rotor applicator consists of a driven piston and a label-pick up pad by way of a vacuum generator and a sensor, which detects the actual pick-up of the label.
The system is “self-adapting” which means that the pad searches for the object and when it senses pressure, then the piston returns to home position.
The Rotor applicator consists of a driven piston and a label-pick up pad by way of a vacuum generator and a sensor, which detects the actual pick-up of the label.
The system is “self-adapting” which means that the pad searches for the object and when it senses pressure, then the piston returns to home position.
The rotor applicator is well-suited for applying labels onto stationary objects and flat surfaces.
- The arm can make a rotating angle of 110°. The label can be applied onto the front or side of the object.
- The applicator device can be mounted onto the printer in three different positions: with Rear Transverse arm, Front Transverse, or with Longitudinal arm.
- The label is applied with a pressure of the pad (adjustable). The position of application of the label depends on the distance of the object.
- Label dimensions: H 30 x B 20 mm (1.2" x .8") - max. H 180 x B 210 mm (7.1" x 8.3").
Models with different arm lengths:
- ROTOR SHORT with 530 mm arm. (20.9")
- ROTOR LONG with 800 mm arm. (31.5")
Rotor is also available with reduced arm length: ROTOR FAST.